GearBug (Simple Electric Car Project)

  • •   9 years ago   •   edited
    0

    Use 3D printed parts, basic electronic components, and step-by-step instructions to build your own GearBug.

    Adapt your GearBug for fun challenges, including drag races, hill climbs, or just plain cool looks!







    Download the project documentation here:


    Download the 3D printable files here:


    These are the hardware parts needed for the project:
    Electric Motor - http://leeselectronic.com/en/product/4753.html?sea...
    Battery Holder - http://leeselectronic.com/en/product/2266.html?sea...
    #2 x 1/4" Screws - http://www.mcmaster.com/#90184a050/=13954hs
    Switch - http://leeselectronic.com/en/product/3121.html?sea...
    Breadboard - http://leeselectronic.com/en/product/103140.html?s...
    Wire, Double-Sided Tape, Screw Driver

COMMENTS


Log In