Gluing PLA parts together with Epoxy Glue

• Tinkerine   •   9 years ago   •   edited

  0

  

  • Copy URL

  
  1. Post-Processing

     ---

  2. Smoothing PLA with Sandpaper
  3. Finishing PLA with Gloss and Matte Topcoat
  4. Smoothing PLA with Primer
  5. Gluing PLA parts together with Epoxy Glue
  6. Gluing PLA parts together with Wood Glue revisited
  7. Gluing PLA parts together with Methylene Chloride
  8. Gluing PLA parts together with ABS solvent Cement
  9. Gluing PLA parts with PVA
  10. Post-Processing with Plasti Dip
  11. 3 System's Mirror Coat
  12. Post Processing with Tamiya Spray Paint
  13. Post-Processing with Enamel Paint
  14. Vapor Smoothing with Acetone on PLA
  15. Vapor Smoothing on PLA with Methylene Chloride
  16. Smoothing PLA with Ethyl Acetate
  17. Smoothing PLA with Methylene Chloride
  18. Smoothing PLA with a Torch
  19. Smoothing PLA with a Heat Gun
  20. Smoothing PLA Prints with a Convection Oven
  21. Post-Processing PLA Prints with Hydro Dipping
  22. Smoothing PLA with Methylene Chloride PLA Paste
  23. Smoothing PLA in a Microwave
  24. Post-Processing 3D Prints by Hydro Dipping Revisited
  25. Post Processing 3D Prints with Nail Polish Top Coat
  26. Post Processing 3D Prints with Nail Polish Top Coat Part 2
  27. Smoothing PLA Prints with a Dremel
  28. Smoothing PLA Prints with Steel Wool
  29. Using Acetone To Vapour Smooth 3D Printed Models Coated with Primer
  30. Using Acetone To Vapour Smooth 3D Printed Models Coated with Primer Part 2
  31. Smoothing 3D Printed PLA Models with CLR
  32. Post-Processing 3D Printed PLA Model with Brasso
  33. Post-Processing 3D Printed PLA Model with Wood Filler
  34. Smoothing out 3D Printed PLA Model with Bar Keepers Friend
  35. Smoothing out 3D Printed PLA Model with Bar Keepers Friend Part 2
  36. Post-Processing 3D Printed PLA Model with Wood Filler Part 2
  37. Post-Processing 3D Printed PLA Print with a Rock Tumbler
  38. Finishing 3D Printed Prints with Acrylic Paint Markers
  39. Post-Processing PLA Prints with a Scouring Pad
  40. Smoothing PLA Prints with Muriatic Acid
  41. Smoothing PLA Prints with Coca-Cola
  42. Smoothing PLA Prints with Lacquer Thinner
  43. Post-Processing 3D Printed PLA Print with a Rock Tumbler Part 2
  44. Post-Processing 3D Printed PLA Print with a Rock Tumbler Part 3
  45. Post-Processing 3D Printed PLA Print with a Rock Tumbler Part 4
  46. Smoothing 3D Printed PLA Print with a Soldering Iron
  47. Smoothing 3D Printed PLA Print with a Soldering Iron Part 2
  48. Smoothing 3D Printed PLA Prints with Wood Glue
  49. Smoothing 3D Printed PLA Parts with Polyurethane
  50. Smoothing 3D Printed PLA Parts with Polyurethane Part 2
  51. Smoothing 3D Printed PLA Prints with Lightweight Filler
  52. Gluing 3D Printed PLA Parts with Goop
  53. Smoothing 3D Printed PLA Parts with Wood Glue Part 2
  54. Gluing 3D Printed PLA Prints with J-B Kwik
  55. Smoothing 3D Printed PLA Parts in a Microwave Part 2
  56. Smoothing 3D Printed PLA Prints with a Lighter
  57. Smoothing PLA Prints with Steel Wool Part 2
  58. PLA Adhesive Summary
  59. Using Super Glue to Post-Process 3D Printed PLA Parts
  60. Using E6000 to Glue PLA Parts Together
  61. Using PLA to Fill in Gaps
  62. Post-Processing PLA Welded Parts
  63. Smoothing 3D Printed PLA Parts with Kapton Tape
  64. Post-Processing Sandblasted 3D Printed PLA Part
  65. Post-Processing 3D Printed PLA Print with Epoxy Putty
  66. Post-Processing 3D Printed PLA Print with Metallic Paint
  67. Post-Processing 3D Printed PLA Print with a Weathering Stick
  68. Post-Processing 3D Printed PLA Print with Liquid Green Stuff
  69. Smoothing 3D Printed PLA Prints with a Sandblaster
  70. Post-Processing 3D Printed PLA Print with Liquid Green Stuff Part 2
  71. Post-Processing 3D Printed PLA Print with Liquid Green Stuff Part 3
  72. Gluing PLA Parts Together with Super Glue and Wood Glue

  Welcome
  to another Tinkerine Experiment! This is a new series that will help
  explore some myths and rumors regarding 3D printing. We will be testing
  it out for ourselves and showing you the results! We will be gluing PLA
  prints together with Epoxy Glue today. Enjoy!
  (Antique pillar by Jerzinek)