3D Printing Using Sugar Water as a Bed Adhesive

• Tinkerine   •   7 years ago

  0

  

  • Copy URL

  
  1. Bed Adhesive

     ---

  2. Bed Adhesion with Hairsprays
  3. Bed Adhesion with Gluestick
  4. ABS Sludge
  5. PLA Sludge
  6. Bed Adhesion with Acrylic Sheet
  7. Bed Adhesion with Frosted Acrylic Sheet and Machine Oil
  8. Bed Adhesion with Frosted Acrylic Sheet and Olive Oil
  9. Bed Adhesion with ABS Solvent Cement
  10. Bed Adhesion with PVA
  11. Bed Adhesive Summary
  12. Bed Adhesion with Double Sided Tape
  13. Inverted Blue Tape as a Bed Adhesive
  14. Bed Adhesion with 3m's Super 77 Multi-Purpose Adhesive Spray
  15. 3D Printing on Paper
  16. Using Maple Syrup as a Bed Adhesive
  17. Using ABS Sheets as a Bed Adhesive
  18. 3D Printing Using Vinyl Transfer Tape as a Bed Adhesive
  19. 3D Printing Using Vinyl Transfer Tape as a Bed Adhesive Part 2
  20. 3D Printing Using Scotch Tape as a Bed Adhesive
  21. 3D Printing Using Wood Glue as a Bed Adhesive
  22. Using Food Silicone Spray as a Bed Adhesive
  23. 3D Printing using Gluestick and Water Solution as a Bed Adhesive
  24. 3D Printing Using Sugar Water as a Bed Adhesive
  25. 3D Printing using Resin as a Bed Adhesive
  26. Using 3D LAC as a Bed Adhesive
  27. Testing Primer and Acrylic Paint as a Bed Adhesive

  Welcome to another episode of Tinkerine Experiments. For this episode, we will be 3D printing using sugar water as a bed adhesive as suggested by Aleksander Alekseev.